/*
   SPI : initialisation du dds et communication SPI
   */
  #include"ad9915.h"
  #include "spi.h"
  #include "ddsFreq.h"
  
  #define debug
  //fonction reset

  void sendReset(int f_dds)

  {

  		write(f_dds,"2",1); 

  }
  
  //fonction ioupdate

  void sendIOUpdate(int f_dds)

  {

  		write(f_dds,"1",1);

  }
  
  //fonction write register

  void  writeRegister (int fd, unsigned char addr, unsigned char d3, unsigned char d2, unsigned char d1, unsigned char d0)

  {
  		unsigned char tx[5]={0};
  		tx[0]=addr;
  		tx[1]=d3;
  		tx[2]=d2;
  		tx[3]=d1;
  		tx[4]=d0;
  		//spi_put_multiple envoie le vecteur dans cet ordre
  		//[tx0]-[tx1]-[tx2] -> adresse->bit poids Fort->bit poids faible
  		spi_put_multiple(fd,tx,5,NULL,0);
  }
  

  //fonction read register
  

  void  readRegister (int fd,unsigned char addr, uint32_t *readword)

  {
  		unsigned char tx[1] = {0};
  		unsigned char rx[4] = {0};
  		addr = addr|0x80;//instruction byte for the read : 1000 0000 | byte_adress
  		tx[0]=addr;
  		spi_put_multiple(fd,tx,1,rx,4);
  		//printf("TX:%x RX:%x %x %x %x
  ",tx[0],rx[0],rx[1],rx[2],rx[3]);
  		*readword = 0x00000000;
  		*readword = *readword|(rx[0]<<24);
  		*readword = *readword|(rx[1]<<16);
  		*readword = *readword|(rx[2]<<8);
  		*readword = *readword|rx[3];
  }
  
  //fonction read register

  void  readRegisterIni (int fd, unsigned char addr)

  {
  		unsigned char tx[1] = {0};
  		unsigned char rx[4] = {0};
  		addr = addr|0x80;
  		tx[0]=addr;
  		spi_put_multiple(fd,tx,1,rx,4);
  		printf("TX:%x RX:%x %x %x %x
  ",tx[0],rx[0],rx[1],rx[2],rx[3]);

  	//	sendIOUpdate (f_dds);    //Send the update to set the control registers

  }
  

  //initialisation du dds

  void initializeDDS (int fd, int f_dds)

  {

  	sendReset(f_dds);
  	writeRegister(fd,CFRAddress[0],CFR1Start[0], CFR1Start[1], CFR1Start[2], CFR1Start[3]);
    	sendIOUpdate (f_dds);    //Send the update to set the control registers
  	writeRegister(fd,CFRAddress[1], CFR2Start[0], CFR2Start[1], CFR2Start[2], CFR2Start[3]);
    	sendIOUpdate (f_dds);
  	writeRegister(fd,CFRAddress[2], CFR3Start[0], CFR3Start[1], CFR3Start[2], CFR3Start[3]);
    	sendIOUpdate (f_dds);
  	writeRegister(fd,CFRAddress[3], CFR4Start[0], CFR4Start[1], CFR4Start[2], CFR4Start[3]);
    	sendIOUpdate (f_dds);
  	writeRegister(fd,USR0Address, 0xA2, 0x00, 0x08, 0x00);
    	sendIOUpdate (f_dds);

  }
  
  //calibration du dac

  void calibrateDAC (int fd, int f_dds)

  {		

  	writeRegister(fd,CFRAddress[3], DACCalEnable[0], DACCalEnable[1], DACCalEnable[2], DACCalEnable[3]);
    	sendIOUpdate (f_dds);
  	writeRegister(fd,CFRAddress[3], CFR4Start[0], CFR4Start[1], CFR4Start[2], CFR4Start[3]);
    	sendIOUpdate (f_dds);

  }
  

  void modulusSetup(int fd, int f_dds) 

  {

  	writeRegister(fd,0x00,0x00, 0x01, 0x01, 0x0a); //OSK enable //0x08

    	sendIOUpdate (f_dds);
  	writeRegister(fd,0x01,0x00, 0x89, 0x09, 0x00); //enable program modulus and digital ramp
    	sendIOUpdate (f_dds);

  }
  

  void basicSetup(int fd, int f_dds,uint16_t ampWord, uint16_t phaseWord)

  {

  	writeRegister(fd,0x00,0x00, 0x01, 0x01, 0x08); //OSK enable
    	sendIOUpdate (f_dds);
  	writeRegister(fd,0x01,0x00, 0x89, 0x09, 0x00); //enable program modulus and digital ramp
    	sendIOUpdate (f_dds);

  	writeRegister(fd,0x04,0x19, 0x99, 0x99, 0x99); //ftw

    	sendIOUpdate (f_dds);

  	writeRegister(fd,0x05,0xC0, 0x00, 0x00, 0x00); //A

    	sendIOUpdate (f_dds);

  	writeRegister(fd,0x06,0x00, 0x00, 0x00, 0x05);  //B

    	sendIOUpdate (f_dds);

  	writeRegister(fd,0x0c, (uint8_t)((ampWord>>8) & 0x0F), (uint8_t)(ampWord & 0xFF), (uint8_t)((phaseWord>>8) & 0xFF), (uint8_t)(phaseWord & 0xFF)); // amp (12b) ph(16)

    	sendIOUpdate (f_dds);

  }
  
  void setFreqMM(int fd, int f_dds, unsigned int ftw, unsigned int A, unsigned int B)
  {

      writeRegister(fd,0x04,ftw>>24&0xFF, ftw>>16&0xFF, ftw>>8&0xFF, ftw&0xFF); //ftw
      sendIOUpdate(f_dds);
      writeRegister(fd,0x05,A>>24&0xFF,A>>16&0xFF, A>>8&0xFF, A&0xFF); //A
      sendIOUpdate(f_dds);
      writeRegister(fd,0x06,B>>24&0xFF,B>>16&0xFF, B>>8&0xFF, B&0xFF); //B
      sendIOUpdate(f_dds);

  }
  
  void setAmpPhaseWord(int fd, int f_dds,unsigned int phaseAmpWord)
  {

     writeRegister(fd,0x0c, phaseAmpWord>>24&0xFF, phaseAmpWord>>16&0xFF,phaseAmpWord>>8&0xFF,phaseAmpWord&0xFF); // amp (12b) ph(16)
     sendIOUpdate(f_dds);

  }
  

  void checkSize(void)
  {	
  		printf("int : %d
  ",sizeof(unsigned int));
  }

  
  int openAndSetDdsFreq( char * device, char * gpio_update, double f_clk, double f_out, uint16_t ampWord, uint16_t phaseWord)
  {
  	#ifdef debug
  	printf("device=%s\tgpio_update=%s\tf_clk=%e\tf_out=%e\tampWord=%d\tphaseWord=%d
  
  ",device,gpio_update,f_clk,f_out,ampWord,phaseWord);
  	#else
  	printf("device=%s\tgpio_update=%s\tf_clk=%e\tf_out=%e\tampWord=%d\tphaseWord=%d
  
  ",device,gpio_update,f_clk,f_out,ampWord,phaseWord);
  	int fd=configureSpi(device); //ex #define FILENAME2 "/dev/spidev0.0"
  	printf("fd(funct)=%d
  ",fd);
  	setMode(fd,SPI_MODE_0);	
  	if (fd <= 0){
  		printf("ERREUR : ouverture périphérique SPI %s
  ",device);
  		return EXIT_FAILURE;	
  	}
  	int f_dds=open(gpio_update,O_RDWR); //ex #define UPDATE2 "/sys/dds/gpio24/updateOn"
  	printf("f_dds(funct)=%d
  ",f_dds);
  	if (f_dds <= 0){
  		printf("ERREUR : ouverture ");printf(gpio_update);printf("
  ");
  		printf("Chargez le module ddsIOupdateX
  ");
  		return EXIT_FAILURE;
  	}
  	setddsFreq(fd,f_dds,f_out,f_clk);
  	//debug
  	phaseWord = 0x0000;
  	ampWord=0x0FFF;
  	uint32_t phaseAmpWord = phaseWord | ampWord<<16;
  	setAmpPhaseWord(fd, f_dds, phaseAmpWord);
  	#endif
  	return EXIT_SUCCESS;	
  }
  
  int setDdsFreqFull ( int fd, int f_dds, double f_clk, double f_out, uint16_t ampWord, uint16_t phaseWord)
  {
  	setddsFreq(fd,f_dds,f_out,f_clk);
  	#ifdef debug
  	phaseWord = 0x0000;
  	ampWord=0x0FFF;
  	#endif
  	uint32_t phaseAmpWord = phaseWord | ampWord<<16;
  	setAmpPhaseWord(fd, f_dds, phaseAmpWord);
  	
  	return EXIT_SUCCESS;
  }
  

  void sendCtrlUp(int fp)

  {

  		//pente positive
  		write(fp,"0",1); 

  }
  

  void sendCtrlDown(int fp)

  {

  		//pente negative
  		write(fp,"2",1);

  }
  

  void sendHold(int fp)

  {

  		//rampe bloquee
  		write(fp,"1",1); 

  }
  

  void sendUnhold(int fp)

  {

  		//rampe debloquee
  		write(fp,"3",1); //reset

  }
  
  
  int testRampFreq(int fd, int f_dds, int fp)
  {
  
  
  	//3-Rampe de pente positive + debloquage

  	sendCtrlDown(fp);//rampe up
  	sendUnhold(fp);

  	sendReset(f_dds);

  	//Initialize_DDS (fd, f_dds);
  
  	//0- paramètre de bases

  	writeRegister(fd,0x00,0x00,0x01,0x01,0x0a);//OSKenable+Read&write
  	sendIOUpdate(f_dds);
  	readRegisterIni(fd,0x00);

  	writeRegister(fd,0x01,0x00, 0x00, 0x09, 0x00); // enable amp ramp
  	sendIOUpdate(f_dds);
  	readRegisterIni(fd,0x00);

  	writeRegister(fd,0x0b,0x02,0xd0,0xe5,0x60);//mot de frequence
  	sendIOUpdate(f_dds);
  	writeRegister(fd,0x0c,0x0F,0xFF,0x00,0x00); //mot de amp et de phase : amp max, phase nulle 
  	sendIOUpdate(f_dds);

  
  	printf("Les mots de frequences, d'amplitudes et de phases sont envoyes
  ");
  	printf("Lecture registre de frequence: 0x0b
  ");

  	readRegisterIni(fd,0x0b);

  	printf("Lecture registre de amp et phase: 0x0c
  ");

  	readRegisterIni(fd,0x0c);

  	calibrateDAC (fd,f_dds);

  	printf("
  
   ----------------------- 
  
  ");
  
  

  	return EXIT_SUCCESS;
  }
  
  //---------------rajout 8/1
  

  int putAmpWord(int fd, int f_dds, double amplitude)

  {
          uint16_t PhaseWord = 0x0000;
          uint16_t AmpWord = 0x0000;
          uint32_t ReadPhaseAmpWord=0x00000000;
  
          AmpWord = rint(amplitude*(pow(2.0,12.0)-1)/100);
  

          readRegister(fd,0x0c,&ReadPhaseAmpWord);

  
          PhaseWord = ReadPhaseAmpWord&0xFFFF;
  

          writeRegister(fd,0x0c,AmpWord>>8&0xFF,AmpWord&0xFF,PhaseWord>>8&0xFF,PhaseWord&0xFF);
          sendIOUpdate(f_dds);

  
          return 0;
  }
  
  

  int putPhaseWord(int fd, int f_dds, double phase)

  {

          //uint16_t PhaseWord = 0x0000;
          //uint16_t AmpWord = 0x0000;

          uint32_t ReadPhaseAmpWord=0x00000000;
  

          uint16_t PhaseWord = rint(phase*(pow(2.0,16.0)-1)/360);

          readRegister(fd,0x0c,&ReadPhaseAmpWord);

          uint16_t AmpWord = ReadPhaseAmpWord>>16&0xFFFF;

          writeRegister(fd,0x0c,AmpWord>>8&0xFF,AmpWord&0xFF,PhaseWord>>8&0xFF,PhaseWord&0xFF);
          sendIOUpdate(f_dds);

  
          return 0;
  }
  

  int putFrequencyWord(int fd, int f_dds, double fclk,double fout)//Attention uniquement valable pour fclk = 1 GHz

  {
  

          //uint32_t FTWR = 0x00000000;
          uint32_t FTWR = rint((fout/fclk)*pow(2.0,32.0));

          writeRegister(fd,0x0b,FTWR>>24&0xFF,FTWR>>16&0xFF,FTWR>>8&0xFF,FTWR&0xFF);//mot de frequence
          sendIOUpdate(f_dds);

  
          return 0;
  }
  
  

  int putFrequencyAmpPhaseWord(int fd, int f_dds, double fout, double fclk,double amp, double phase)//n'existe pas dans le mode profile enable

  {
  

          //uint32_t FTWR = 0x00000000;

          uint32_t FTWR = rint((fout/fclk)*pow(2.0,32.0));

          writeRegister(fd,0x0b,FTWR>>24&0xFF,FTWR>>16&0xFF,FTWR>>8&0xFF,FTWR&0xFF);//mot de frequence

          sendIOUpdate(f_dds);

          putPhaseWord(fd,f_dds,phase);
          putAmpWord(fd,f_dds,amp);

  
          return 0;
  }
  
  

  int initialisationProfileMode (int fd,int f_dds)

  {
  

          sendReset(f_dds); //les registres sont maintenant par defaut
          writeRegister(fd,0x00,0x00,0x01,0x01,0x0a); //OSK+SDIO input only//ok
          sendIOUpdate(f_dds);
          writeRegister(fd,0x01,0x00,0x80,0x09,0x00); // profile mode enable very important
          sendIOUpdate(f_dds);
          writeRegister(fd,0x02,0x00,0x00,0x19,0x1c); // default
          sendIOUpdate(f_dds);
          writeRegister(fd,0x03,0x01,0x05,0x21,0x20); // calibration 1/2 :enable
          sendIOUpdate(f_dds);
          writeRegister(fd,0x03,0x00,0x05,0x21,0x20); // calibration 2/2 :desenable
          sendIOUpdate(f_dds);

  
          return 0;
  }
  
  
  
  //------------------- FIN RAJOUT 8/1
  
  
  //-------------------------FONCTIONS RAMPES HARDWARE
  
  //1-rampe de frequence
  
  //rampe simple de fréquence

  int frequencySweep (int fd, int f_dds,double fclk,double dfUp, double dfDown, double FreqMax,double FreqMin, double DeltaTimeUp, double DeltaTimeDown)

  {
          //calcul de N => N=DeltaF/df = DeltaT/dt
  
  	//1-fmax > fmin
  	double DeltaFreq = FreqMax-FreqMin;
  	if(FreqMax<FreqMin)
  	{
  		printf("FreqMax should be > FreqMin
  ");
  		printf("Can't Start the ramp
  ");
  		return -1;
  	}
  	
  	//2- Calcul du nombre de points de la rampe
  	int NumberPointsUp = DeltaFreq/dfUp;
  	int NumberPointsDown = DeltaFreq/dfDown;
  	
  	//3- En déduire la valeur de dtUp et dtDown
  	double dtUp = DeltaTimeUp/NumberPointsUp;
  	double dtDown = DeltaTimeDown/NumberPointsDown;
  
  	double dtmin = 24/fclk;
  	double dtmax = dtmin*(pow(2.0,16.0)-1);
  
  	//Check Up
  	if(dtUp<dtmin)
  	{
  		printf("During of ramp UP should be > %f s
  ",dtmin*NumberPointsUp);
  		printf("Can't start the ramp
  ");
  		return -1;
  	}
  
  	if(dtUp>dtmax)
  	{
  		printf("During of ramp UP should be < %f
  ",dtmax*NumberPointsUp);
  		printf("Can't start the ramp
  ");
  		return -1;
  	}
  
  	//Check Down
  	if(dtDown<dtmin)
  	{
  		printf("During of ramp DOWN  should be > %f s
  ",dtmin*NumberPointsDown);
  		printf("Can't start the ramp
  ");
  		return -1;
  	}
  
  	if(dtDown>dtmax)
  	{
  		printf("During of ramp DOWN should be < %f
  ",dtmax*NumberPointsDown);
  		printf("Can't start the ramp
  ");
  		return -1;
  	}
  
  
  	//4 - Put word in register
  
  
  	//4.1 Limit register
          uint32_t FTWRmin = rint((FreqMin/fclk)*pow(2.0,32.0));

          writeRegister(fd,0x04,FTWRmin>>24&0xFF,FTWRmin>>16&0xFF,FTWRmin>>8&0xFF,FTWRmin&0xFF);//mot de frequence
          sendIOUpdate(f_dds);

  
          uint32_t FTWRmax = rint((FreqMax/fclk)*pow(2.0,32.0));

          writeRegister(fd,0x05,FTWRmax>>24&0xFF,FTWRmax>>16&0xFF,FTWRmax>>8&0xFF,FTWRmax&0xFF);//mot de frequence
          sendIOUpdate(f_dds);

  
  	
  	//4.2 dfUP et dfDown
          double df_up = DeltaFreq/NumberPointsUp;
          double df_down = DeltaFreq/NumberPointsDown;
  
          uint32_t Word_df_up = rint(df_up*pow(2.0,32.0)/fclk);
          uint32_t Word_df_down = rint(df_down*pow(2.0,32.0)/fclk);
  

          writeRegister(fd,0x06,Word_df_up>>24&0xFF,Word_df_up>>16&0xFF,Word_df_up>>8&0xFF,Word_df_up&0xFF); //df_up
          sendIOUpdate(f_dds);
          writeRegister(fd,0x07,Word_df_down>>24&0xFF,Word_df_down>>16&0xFF,Word_df_down>>8&0xFF,Word_df_down&0xFF);//df_down
          sendIOUpdate(f_dds);

  
  
  	//4.3 dtUp et dtDown
  
          uint16_t Word_dt_up = 0x0000;
          uint16_t Word_dt_down = 0x0000;
  
          Word_dt_up = rint(dtUp*fclk/24);
          Word_dt_down = rint(dtDown*fclk/24);
  

          writeRegister(fd,0x08,Word_dt_down>>8&0xFF,Word_dt_down&0xFF,Word_dt_up>>8&0xFF,Word_dt_up&0xFF);  // il y a 2 dt
          sendIOUpdate(f_dds);

  
          //5 Start of the ramp
  

          writeRegister(fd,0x01,0x00,0x08,0x09,0x00); //rampe simple
          sendIOUpdate(f_dds);

          return 0;
  
  
  
          return EXIT_SUCCESS;
  
  }
  
  
  //rampe continue de fréquence

  int continueFrequencySweep (int fd, int f_dds,double fclk,double dfUp, double dfDown, double FreqMax,double FreqMin, double DeltaTimeUp, double DeltaTimeDown)

  {
          //calcul de N => N=DeltaF/df = DeltaT/dt
  
  	//1-fmax > fmin
  	double DeltaFreq = FreqMax-FreqMin;
  	if(FreqMax<FreqMin)
  	{
  		printf("FreqMax should be > FreqMin
  ");
  		printf("Can't Start the ramp
  ");
  		return -1;
  	}
  	
  	//2- Calcul du nombre de points de la rampe
  	int NumberPointsUp = DeltaFreq/dfUp;
  	int NumberPointsDown = DeltaFreq/dfDown;
  	
  	//3- En déduire la valeur de dtUp et dtDown
  	double dtUp = DeltaTimeUp/NumberPointsUp;
  	double dtDown = DeltaTimeDown/NumberPointsDown;
  
  	double dtmin = 24/fclk;
  	double dtmax = dtmin*(pow(2.0,16.0)-1);
  
  	//Check Up
  	if(dtUp<dtmin)
  	{
  		printf("During of ramp UP should be > %f s
  ",dtmin*NumberPointsUp);
  		printf("Can't start the ramp
  ");
  		return -1;
  	}
  
  	if(dtUp>dtmax)
  	{
  		printf("During of ramp UP should be < %f
  ",dtmax*NumberPointsUp);
  		printf("Can't start the ramp
  ");
  		return -1;
  	}
  
  	//Check Down
  	if(dtDown<dtmin)
  	{
  		printf("During of ramp DOWN  should be > %f s
  ",dtmin*NumberPointsDown);
  		printf("Can't start the ramp
  ");
  		return -1;
  	}
  
  	if(dtDown>dtmax)
  	{
  		printf("During of ramp DOWN should be < %f
  ",dtmax*NumberPointsDown);
  		printf("Can't start the ramp
  ");
  		return -1;
  	}
  
  
  	//4 - Put word in register
  
  
  	//4.1 Limit register
          uint32_t FTWRmin = rint((FreqMin/fclk)*pow(2.0,32.0));

          writeRegister(fd,0x04,FTWRmin>>24&0xFF,FTWRmin>>16&0xFF,FTWRmin>>8&0xFF,FTWRmin&0xFF);//mot de frequence
          sendIOUpdate(f_dds);

  
          uint32_t FTWRmax = rint((FreqMax/fclk)*pow(2.0,32.0));

          writeRegister(fd,0x05,FTWRmax>>24&0xFF,FTWRmax>>16&0xFF,FTWRmax>>8&0xFF,FTWRmax&0xFF);//mot de frequence
          sendIOUpdate(f_dds);

  
  	
  	//4.2 dfUP et dfDown
          double df_up = DeltaFreq/NumberPointsUp;
          double df_down = DeltaFreq/NumberPointsDown;
  
          uint32_t Word_df_up = rint(df_up*pow(2.0,32.0)/fclk);
          uint32_t Word_df_down = rint(df_down*pow(2.0,32.0)/fclk);
  

          writeRegister(fd,0x06,Word_df_up>>24&0xFF,Word_df_up>>16&0xFF,Word_df_up>>8&0xFF,Word_df_up&0xFF); //df_up
          sendIOUpdate(f_dds);
          writeRegister(fd,0x07,Word_df_down>>24&0xFF,Word_df_down>>16&0xFF,Word_df_down>>8&0xFF,Word_df_down&0xFF);//df_down
          sendIOUpdate(f_dds);

  
  
  	//4.3 dtUp et dtDown
  
          uint16_t Word_dt_up = 0x0000;
          uint16_t Word_dt_down = 0x0000;
  
          Word_dt_up = rint(dtUp*fclk/24);
          Word_dt_down = rint(dtDown*fclk/24);
  

          writeRegister(fd,0x08,Word_dt_down>>8&0xFF,Word_dt_down&0xFF,Word_dt_up>>8&0xFF,Word_dt_up&0xFF);  // il y a 2 dt
          sendIOUpdate(f_dds);

  
          //5 Start of the ramp
  

          writeRegister(fd,0x01,0x00,0x8e,0x29,0x00); //rampe triangulaire
          sendIOUpdate(f_dds);

          return 0;
  
  
  
          return EXIT_SUCCESS;
  
  }
  
  //2-rampe d'amplitude
  

  int amplitudeSweep (int fd, int f_dds,double fclk,double dAUp, double dADown, double AMax,double AMin, double DeltaTimeUp, double DeltaTimeDown)

  {
  
  
          //calcul de N => N=DeltaF/df = DeltaT/dt
  
  	//1-Amax > Amin
  	double DeltaAmp = AMax-AMin;
  	if(AMax<AMin)
  	{
  		printf("AMax should be > AMin
  ");
  		printf("Can't Start the ramp
  ");
  		return -1;
  	}
  	
  	
  	//2- Calcul du nombre de points de la rampe
  	int NumberPointsUp = DeltaAmp/dAUp;
  	int NumberPointsDown = DeltaAmp/dADown;
  	
  	//3- En déduire la valeur de dtUp et dtDown
  	double dtUp = DeltaTimeUp/NumberPointsUp;
  	double dtDown = DeltaTimeDown/NumberPointsDown;
  
  	double dtmin = 24/fclk;
  	double dtmax = dtmin*(pow(2.0,16.0)-1);
  
  	//Check Up
  	if(dtUp<dtmin)
  	{
  		printf("During of ramp UP should be > %f s
  ",dtmin*NumberPointsUp);
  		printf("Can't start the ramp
  ");
  		return -1;
  	}
  
  	if(dtUp>dtmax)
  	{
  		printf("During of ramp UP should be < %f
  ",dtmax*NumberPointsUp);
  		printf("Can't start the ramp
  ");
  		return -1;
  	}
  
  	//Check Down
  	if(dtDown<dtmin)
  	{
  		printf("During of ramp DOWN  should be > %f s
  ",dtmin*NumberPointsDown);
  		printf("Can't start the ramp
  ");
  		return -1;
  	}
  
  	if(dtDown>dtmax)
  	{
  		printf("During of ramp DOWN should be < %f
  ",dtmax*NumberPointsDown);
  		printf("Can't start the ramp
  ");
  		return -1;
  	}
  
  
  
  	//check if DeltaAmp is enouth
          double enouthUP=0.5*NumberPointsUp*100/4095;
          double enouthDOWN=0.5*NumberPointsDown*100/4095;
  
          int borneUP = rint(enouthUP);
          int borneDown = rint(enouthDOWN);
  
           if(DeltaAmp<=enouthUP)
          {
                  printf("The amplitude difference should be > %d
  , decrease Number Points for positive slope",borneUP);

          }
  
          if(DeltaAmp<=enouthDOWN)
          {
                  printf("The amplitude difference should be > %d
  , decrease Number Points for negative slope",borneDown);

          }
  
  
  	//4 - Put word in register
  
  
  	//4.1 Limit register
  	uint32_t WordAmin = rint(AMin*4095/100);
  	uint32_t WordAmax= rint(AMax*4095/100);
         

  	 writeRegister(fd,0x04,WordAmin>>24&0xFF,WordAmin>>16&0xFF,WordAmin>>8&0xFF,WordAmin&0xFF); //min => lim-(Amp ) = 0x800 = Amax/2
          sendIOUpdate(f_dds);
          writeRegister(fd,0x05,WordAmax>>24&0xFF,WordAmax>>16&0xFF,WordAmax>>8&0xFF,WordAmax&0xFF);//max => lim+(Amp) = 0xFFF= Amax0
          sendIOUpdate(f_dds);

  
  
  	//4.2 dAUP et dADown
  
  	uint32_t Word_dA_up = rint(dAUp*4095/100);
          uint32_t Word_dA_down = rint(dADown*4095/100);
  

          writeRegister(fd,0x06,Word_dA_up>>24&0xFF,Word_dA_up>>16&0xFF,Word_dA_up>>8&0xFF,Word_dA_up&0xFF); //dA_up
          sendIOUpdate(f_dds);
          writeRegister(fd,0x07,Word_dA_down>>24&0xFF,Word_dA_down>>16&0xFF,Word_dA_down>>8&0xFF,Word_dA_down&0xFF);//dA_down
          sendIOUpdate(f_dds);

  
  
  	//4.3 dtUp et dtDown
  
          uint16_t Word_dt_up = rint(dtUp*fclk/24);
          uint16_t Word_dt_down = rint(dtDown*fclk/24);
  

          writeRegister(fd,0x08,Word_dt_down>>8&0xFF,Word_dt_down&0xFF,Word_dt_up>>8&0xFF,Word_dt_up&0xFF);  // il y a 2 dt
          sendIOUpdate(f_dds);

  
          //5 Start of the ramp
  

  	writeRegister(fd,0x01,0x00,0x28,0x09,0x00); //rampe simple montante
  	//writeRegister(fd,0x01,0x00,0xAE,0x29,0x00); //rampe continue
          sendIOUpdate(f_dds);

  
          return EXIT_SUCCESS;
  }
  

  int continueAmplitudeSweep (int fd, int f_dds,double fclk,double dAUp, double dADown, double AMax,double AMin, double DeltaTimeUp, double DeltaTimeDown)

  {
  
  
          //calcul de N => N=DeltaF/df = DeltaT/dt
  
  	//1-Amax > Amin
  	double DeltaAmp = AMax-AMin;
  	if(AMax<AMin)
  	{
  		printf("AMax should be > AMin
  ");
  		printf("Can't Start the ramp
  ");
  		return -1;
  	}
  	
  	
  	//2- Calcul du nombre de points de la rampe
  	int NumberPointsUp = DeltaAmp/dAUp;
  	int NumberPointsDown = DeltaAmp/dADown;
  	
  	//3- En déduire la valeur de dtUp et dtDown
  	double dtUp = DeltaTimeUp/NumberPointsUp;
  	double dtDown = DeltaTimeDown/NumberPointsDown;
  
  	double dtmin = 24/fclk;
  	double dtmax = dtmin*(pow(2.0,16.0)-1);
  
  	//Check Up
  	if(dtUp<dtmin)
  	{
  		printf("During of ramp UP should be > %f s
  ",dtmin*NumberPointsUp);
  		printf("Can't start the ramp
  ");
  		return -1;
  	}
  
  	if(dtUp>dtmax)
  	{
  		printf("During of ramp UP should be < %f
  ",dtmax*NumberPointsUp);
  		printf("Can't start the ramp
  ");
  		return -1;
  	}
  
  	//Check Down
  	if(dtDown<dtmin)
  	{
  		printf("During of ramp DOWN  should be > %f s
  ",dtmin*NumberPointsDown);
  		printf("Can't start the ramp
  ");
  		return -1;
  	}
  
  	if(dtDown>dtmax)
  	{
  		printf("During of ramp DOWN should be < %f
  ",dtmax*NumberPointsDown);
  		printf("Can't start the ramp
  ");
  		return -1;
  	}
  
  
  
  	//check if DeltaAmp is enouth
          double enouthUP=0.5*NumberPointsUp*100/4095;
          double enouthDOWN=0.5*NumberPointsDown*100/4095;
  
          int borneUP = rint(enouthUP);
          int borneDown = rint(enouthDOWN);
  
           if(DeltaAmp<=enouthUP)
          {
                  printf("The amplitude difference should be > %d
  , decrease Number Points for positive slope",borneUP);
                  //return -1;
          }
  
          if(DeltaAmp<=enouthDOWN)
          {
                  printf("The amplitude difference should be > %d
  , decrease Number Points for negative slope",borneDown);
                  //return -1;
          }
  
  
  	//4 - Put word in register
  
  
  	//4.1 Limit register
  	uint32_t WordAmin = rint(AMin*4095/100);
  	uint32_t WordAmax= rint(AMax*4095/100);
         

  	 writeRegister(fd,0x04,WordAmin>>24&0xFF,WordAmin>>16&0xFF,WordAmin>>8&0xFF,WordAmin&0xFF); //min => lim-(Amp ) = 0x800 = Amax/2
          sendIOUpdate(f_dds);
          writeRegister(fd,0x05,WordAmax>>24&0xFF,WordAmax>>16&0xFF,WordAmax>>8&0xFF,WordAmax&0xFF);//max => lim+(Amp) = 0xFFF= Amax0
          sendIOUpdate(f_dds);

  
  
  	//4.2 dAUP et dADown
  
  	uint32_t Word_dA_up = rint(dAUp*4095/100);
          uint32_t Word_dA_down = rint(dADown*4095/100);
  

          writeRegister(fd,0x06,Word_dA_up>>24&0xFF,Word_dA_up>>16&0xFF,Word_dA_up>>8&0xFF,Word_dA_up&0xFF); //dA_up
          sendIOUpdate(f_dds);
          writeRegister(fd,0x07,Word_dA_down>>24&0xFF,Word_dA_down>>16&0xFF,Word_dA_down>>8&0xFF,Word_dA_down&0xFF);//dA_down
          sendIOUpdate(f_dds);

  
  
  	//4.3 dtUp et dtDown
  
          uint16_t Word_dt_up = rint(dtUp*fclk/24);
          uint16_t Word_dt_down = rint(dtDown*fclk/24);
  

          writeRegister(fd,0x08,Word_dt_down>>8&0xFF,Word_dt_down&0xFF,Word_dt_up>>8&0xFF,Word_dt_up&0xFF);  // il y a 2 dt
          sendIOUpdate(f_dds);

  
          //5 Start of the ramp
  

  	//writeRegister(fd,0x01,0x00,0x28,0x09,0x00); //rampe simple montante
  	writeRegister(fd,0x01,0x00,0xAE,0x29,0x00); //rampe continue
          sendIOUpdate(f_dds);

  
          return EXIT_SUCCESS;
  }
  
  
  //3-rampe de ĥase
  

  int phaseSweep (int fd, int f_dds,double fclk,double dphiUp, double dphiDown, double PhiMax,double PhiMin, double DeltaTimeUp, double DeltaTimeDown)

  {
  
  
          //calcul de N => N=Deltaphi/dphi = DeltaT/dt
  
  	//1-phimax > phimin
  	double DeltaPhi = PhiMax-PhiMin;
  	if(PhiMax<PhiMin)
  	{
  		printf("PhiMax should be > PhiMin
  ");
  		printf("Can't Start the ramp
  ");
  		return -1;
  	}
  	
  	
  	//2- Calcul du nombre de points de la rampe
  	int NumberPointsUp = DeltaPhi/dphiUp;
  	int NumberPointsDown = DeltaPhi/dphiDown;
  	
  	printf("NumberPointsUp = %d
  ",NumberPointsUp);
  	printf("NumberPointsDown = %d
  ",NumberPointsDown);
  
  	//3- En déduire la valeur de dtUp et dtDown
  	double dtUp = DeltaTimeUp/NumberPointsUp;
  	double dtDown = DeltaTimeDown/NumberPointsDown;
  
  	double dtmin = 24/fclk;
  	double dtmax = dtmin*(pow(2.0,16.0)-1);
  
  	//Check Up
  	if(dtUp<dtmin)
  	{
  		printf("During of ramp UP should be > %f s
  ",dtmin*NumberPointsUp);
  		printf("Can't start the ramp
  ");
  		return -1;
  	}
  
  	if(dtUp>dtmax)
  	{
  		printf("During of ramp UP should be < %f
  ",dtmax*NumberPointsUp);
  		printf("Can't start the ramp
  ");
  		return -1;
  	}
  
  	//Check Down
  	if(dtDown<dtmin)
  	{
  		printf("During of ramp DOWN  should be > %f s
  ",dtmin*NumberPointsDown);
  		printf("Can't start the ramp
  ");
  		return -1;
  	}
  
  	if(dtDown>dtmax)
  	{
  		printf("During of ramp DOWN should be < %f
  ",dtmax*NumberPointsDown);
  		printf("Can't start the ramp
  ");
  		return -1;
  	}
  
  

  	//4.1 Limit register
  	uint32_t WordPhimin = rint(PhiMin*65535/360);
  	uint32_t WordPhimax= rint(PhiMax*65535/360);
        
  
  	printf("WordPhimin = %.32x
  ",WordPhimin);
  	printf("WordPhimax = %.32x
  ",WordPhimax);
  
   

  	 writeRegister(fd,0x04,WordPhimin>>24&0xFF,WordPhimin>>16&0xFF,WordPhimin>>8&0xFF,WordPhimin&0xFF); //min => lim-(Amp ) = 0x800 = Amax/2
          sendIOUpdate(f_dds);
          writeRegister(fd,0x05,WordPhimax>>24&0xFF,WordPhimax>>16&0xFF,WordPhimax>>8&0xFF,WordPhimax&0xFF);//max => lim+(Amp) = 0xFFF= Amax0
          sendIOUpdate(f_dds);

  
  
  	//4.2 dphiUP et dphiDown
  

  	uint32_t Word_dphi_up = rint(dphiUp*(65535/360));
          uint32_t Word_dphi_down = rint(dphiDown*(65535/360));
  
  	printf("Word_dphi_up = %.32x
  ",Word_dphi_up);
  	printf("Word_dphi_down = %.32x
  ",Word_dphi_down);
  

  	writeRegister(fd,0x06,Word_dphi_up>>24&0xFF,Word_dphi_up>>16&0xFF,Word_dphi_up>>8&0xFF,Word_dphi_up&0xFF); //dA_up
          sendIOUpdate(f_dds);
          writeRegister(fd,0x07,Word_dphi_down>>24&0xFF,Word_dphi_down>>16&0xFF,Word_dphi_down>>8&0xFF,Word_dphi_down&0xFF);//dA_down
          sendIOUpdate(f_dds);

  
  
  	//4.3 dtUp et dtDown
  
          uint16_t Word_dt_up = rint(dtUp*fclk/24);
          uint16_t Word_dt_down = rint(dtDown*fclk/24);
  

          writeRegister(fd,0x08,Word_dt_down>>8&0xFF,Word_dt_down&0xFF,Word_dt_up>>8&0xFF,Word_dt_up&0xFF);  // il y a 2 dt
          sendIOUpdate(f_dds);

  
          //5 Start of the ramp
  

  	writeRegister(fd,0x01,0x00,0x18,0x09,0x00); //rampe simple montante
          sendIOUpdate(f_dds);

  
          return EXIT_SUCCESS;
  }
  

  int continuePhaseSweep (int fd, int f_dds,double fclk,double dphiUp, double dphiDown, double PhiMax,double PhiMin, double DeltaTimeUp, double DeltaTimeDown)

  {
  
  
          //calcul de N => N=Deltaphi/dphi = DeltaT/dt
  
  	//1-phimax > phimin
  	double DeltaPhi = PhiMax-PhiMin;
  	if(PhiMax<PhiMin)
  	{
  		printf("PhiMax should be > PhiMin
  ");
  		printf("Can't Start the ramp
  ");
  		return -1;
  	}
  	
  	
  	//2- Calcul du nombre de points de la rampe
  	int NumberPointsUp = DeltaPhi/dphiUp;
  	int NumberPointsDown = DeltaPhi/dphiDown;
  	
  	printf("NumberPointsUp = %d
  ",NumberPointsUp);
  	printf("NumberPointsDown = %d
  ",NumberPointsDown);
  
  	//3- En déduire la valeur de dtUp et dtDown
  	double dtUp = DeltaTimeUp/NumberPointsUp;
  	double dtDown = DeltaTimeDown/NumberPointsDown;
  
  	double dtmin = 24/fclk;
  	double dtmax = dtmin*(pow(2.0,16.0)-1);
  
  	//Check Up
  	if(dtUp<dtmin)
  	{
  		printf("During of ramp UP should be > %f s
  ",dtmin*NumberPointsUp);
  		printf("Can't start the ramp
  ");
  		return -1;
  	}
  
  	if(dtUp>dtmax)
  	{
  		printf("During of ramp UP should be < %f
  ",dtmax*NumberPointsUp);
  		printf("Can't start the ramp
  ");
  		return -1;
  	}
  
  	//Check Down
  	if(dtDown<dtmin)
  	{
  		printf("During of ramp DOWN  should be > %f s
  ",dtmin*NumberPointsDown);
  		printf("Can't start the ramp
  ");
  		return -1;
  	}
  
  	if(dtDown>dtmax)
  	{
  		printf("During of ramp DOWN should be < %f
  ",dtmax*NumberPointsDown);
  		printf("Can't start the ramp
  ");
  		return -1;
  	}
  
  

  	//4 - Put word in register
  
  
  	//4.1 Limit register
  	uint32_t WordPhimin = rint(PhiMin*65535/360);
  	uint32_t WordPhimax= rint(PhiMax*65535/360);
        
  
  	printf("WordPhimin = %.32x
  ",WordPhimin);
  	printf("WordPhimax = %.32x
  ",WordPhimax);
  
   

  	 writeRegister(fd,0x04,WordPhimin>>24&0xFF,WordPhimin>>16&0xFF,WordPhimin>>8&0xFF,WordPhimin&0xFF); //min => lim-(Amp ) = 0x800 = Amax/2
          sendIOUpdate(f_dds);
          writeRegister(fd,0x05,WordPhimax>>24&0xFF,WordPhimax>>16&0xFF,WordPhimax>>8&0xFF,WordPhimax&0xFF);//max => lim+(Amp) = 0xFFF= Amax0
          sendIOUpdate(f_dds);

  
  
  	//4.2 dphiUP et dphiDown
  

  	uint32_t Word_dphi_up = rint(dphiUp*(65535/360));
          uint32_t Word_dphi_down = rint(dphiDown*(65535/360));
  
  	printf("Word_dphi_up = %.32x
  ",Word_dphi_up);
  	printf("Word_dphi_down = %.32x
  ",Word_dphi_down);
  

  	writeRegister(fd,0x06,Word_dphi_up>>24&0xFF,Word_dphi_up>>16&0xFF,Word_dphi_up>>8&0xFF,Word_dphi_up&0xFF); //dA_up
          sendIOUpdate(f_dds);
          writeRegister(fd,0x07,Word_dphi_down>>24&0xFF,Word_dphi_down>>16&0xFF,Word_dphi_down>>8&0xFF,Word_dphi_down&0xFF);//dA_down
          sendIOUpdate(f_dds);

  
  
  	//4.3 dtUp et dtDown
  
          uint16_t Word_dt_up = rint(dtUp*fclk/24);
          uint16_t Word_dt_down = rint(dtDown*fclk/24);
  

          writeRegister(fd,0x08,Word_dt_down>>8&0xFF,Word_dt_down&0xFF,Word_dt_up>>8&0xFF,Word_dt_up&0xFF);  // il y a 2 dt
          sendIOUpdate(f_dds);

  
          //5 Start of the ramp
  

  	writeRegister(fd,0x01,0x00,0x9E,0x29,0x00); //rampe simple montante
          sendIOUpdate(f_dds);

  
          return EXIT_SUCCESS;
  }
  
  
  //-------------------------FIN FONCTIONS RAMPES HARDWARES
  

  int receiveParameterFromPythonServer(char * device, double f_clk, double f_out){
  
          printf("receiveParameterFromPythonServer::device=%s\tf_clk=%e\tf_out=%e
  ",device,f_clk,f_out);
          return 0;
  }